Selecting Your Radio Rack Mount

Many of our rack mounts will work with more than one radio. We have listed the radios we know under Current Products for each model rack mount. There are sure to be more radios than those shown. If you have any questions about which model rack mount fits which radio, or need a size or shape that you don't see, please drop us an email.

If you have a radio that is not listed in our Store list, measure the front bezel of your radio and compare to the measurements listed as bezel size. Sometimes a radio may be slightly smaller than an existing rack mount and it could be a cost-effective way to have that radio rack mounted even though it may not be a perfect fit.

What size is your radio?

We have provided a list of most Icom, Kenwood, Yaesu, AOR, Collins S line, Drake R4 & R7 line, Ten Tec and JRC. You will find the bezel size listed in inches and mm. By knowing your radio size you can go back to our product list and see if we have a rack mount that will accommodate your radio or, if your radio is slightly smaller, it will fit but will have a gap between the radio and the bezel. This may be a cost-effective way to rack mount a radio when there is no rack mount designed for that exact model.

If you want an exact match to your radio, please contact us, we can make a rack mount for almost any radio that is less than 17.5" wide, for a 19" rack panel, or 21.5" for a 23" rack panel.

NovexComm Newsletter

FIFTY WAYS USING HAM RADIO TO BEAT THE VIRUS

With apologies to Simon and Garfunkel, 50 Ways Song parody by Bob Burchett

Social-distancing via ham radio is the best medicine; just remember this little ditty:
The problem is all inside my head; yes, I know;
My wife this morning said to me
The answer's easy if you stop wondering Joe
I'd like to help you fellow hams....but then you know:
There must be fifty ways to beat the virus....Fifty ways to beat this virus....

Stay back in the shack, Jack
Don't need to be coy, Roy, just listen to me
Hop off the bus, Gus, there's fungus among USSS!
Don't hoard the TP Lee, to keep virus free.

You are already used to DX all alone
And you may have L-O-T-L everyone
So when you burn the midnight oil in there
DXCC is still elusive; work some more.

Don't visit your gran; Stan
Wipe down every toy Roy, just listen to me
Just use that Purell; Mel
Keep pounding the key Lee; heed the CDC. Keep virus free.

This Cycle 25 is not going so well
And FT8 may be the way
I'm trying PSK and other crazy codes
The Gray Line moves much faster than I can today

So work 40 meters Peter
Rag chew on FM; Tim
This isn't spring break Jake
Call CQ all day

Wear a mask on the bus Gus...don't need to discuss muuuuuch
Stop touching your face Grace
You need PPE...
Hide out in the shack, Mack. Stay home if you're sick, Dick
Have wipes in your purse, nurse and stay virus free.

Sneeze into your sleeve, Steve
Keep back 2 Meters, Jeeter
Just follow the rules, Jules to keep virus free.
Keep soap in your hand Fran and keep virus free!

WB6SLC W6JK WA6ILQ KD8PIQ K6SLC

Random Rack

Uniden Dual BC536/ BCD996P2/ BCT-15

$134.95

Uniden Dual BC536/ BCD996P2/ BCT-15

Size: 2U

Rack mount for dual BC536/ BCD996P2/ BCT-15

|
Shop for more products in our store by clicking here.

Rack Mount Your Radios

NovexComm provides low-cost, professional rack mounts for many popular radios, giving operators a source for off-the-shelf, low cost radio rack mount kits.

Why Rack Mount Radios?

Here are just a few reasons given by some of the operators we have heard from
  • Gives my radio room a professional look.
  • Saves space so I can buy more radios and have a place to keep them.
  • Makes it easier to access and use my equipment all in one place.
  • Keeps my gear protected from bumps and scratches.
  • If someone breaks into my house, then they will have a difficult time getting my radios.
  • I finally have all those ugly wires out of sight, looks great.
  • My wife likes the way my shack looks; she even shows her friends my room.

Testimonial

WA5RAY Testimonial:
Thanks Novexcomm for your great products. I was trying to rack mount my radio equipment into my console racks and was failing miserably. Luckily, I ran across your ad and have since successfully rack mounted several units very easily. The chassis design of your system for the larger rigs moves the weight of the actual radio equipment from the front panel and transfers it to the rack through your integrated chassis shelf. This greatly helps installing, removing and working on the gear. It also reduces the rattles that come from the stresses from the weight of the gear that is supported entirely from the single panel itself. Very COOL indeed! Thanks again for being there for a guy in need.
Ray, WA5RAY

Copyright © NovexComm.com